Received the parcel over. Original packaging + the Amazon, no complaints. Just a few minor remarks but may be important to some. 1- there is a slight clearance at the main axis, not important but still, it distorts the cutting angle. Probably compensatable with a very thin shim. 2- Given the size and weight of the machine must support the whole, the thickness of the sheet with which the base was rammed seem a little low. Also because to cut some metal part must still support slightly ... 3- The jaw system is also slightly fragile. An example: In clutching a piece of metal, I simply pushed back the fixed jaw .. You really tighten everything thoroughly. Overall a good tool for DIY.