Then have the device unpacked and tested very ausgibig. Unfortunately, the 1st unit had strong clouding. For this reason this went back again and I let get a replacement unit. This was not a problem thanks to the return policy.
At the 2nd unit Clouding was still present but no longer as strong. I decided to keep the unit.
1. Bildqualtiät and settings
Now for wichtigestem from Tv. Unfortunately the TV know the typical weaknesses of LED Tv's on eg Clouding and weak viewing angles in dark colors. These appear slightly milky as you go to page.
As most should already be known to bring the Tv no good reason settings with them. Have some settings tested from the Internet and also tried himself and still try.
As an aid to setting I used test images.
Here are my current ideal setting for the TV:
Picture Mode: Standard (here is to actively regulate Micro Dimming the Hintergrundbeleuchung and create more contrast, dadruch also the Clouding is better Fals available With the "film" that is not, for example, active Here is also a yellowish tint over the image.. set I did not find that great.)
Backlight: 11
Contrast: 95
Brightness: 48
Sharpness: 25 (should not be too high)
Color: 45
Color: G50R50
Image Format: Image Adjustment
Advanced Settings:
Dynamic Contrast: Medium (Adjusts the contrast in order to avoid excessive brightness and darkness differences automatically)
Black Tone: Dark (improves picture depth by adjusting the color depth of the Black)
Skin Tone: 0 (increase the amount of red from -15 to +15)
RGB Only Mode: Off (Shows the individual colors to optimize hue and saturation)
Color Space: Native (for the color range that can be displayed simultaneously on the screen)
White Balance: have not changed (Adjusts the brightness of red, green and blue as one that is the brightest part of the image White)
Gamma: 0 (Sets the intensity of a primary color)
Motion controlled lighting: From (the reduction of power consumption by brightness control of movements used)
Picture options:
Color: Standart
Digitally conditions: low (here I have found that in SD material "Auto" is better, because here the noise to some is better in HD material details are smoothed out too much at too high setting is why I have "low" for.. enschieden to residual noise somewhat dampen but to get the details anyway.)
MPEG Noise Filter: Off
Filmodus: Off
Motion Plus: Off (Optimizes the display for fast motion scenes)
Ökolösung: Off
So I now have a good to very good picture. Prerequisite is of course a good quality input from Full HD material. At 720p has already slight losses of Bildquältiät I find. UHD is of course the best. Here is the TV what he can for example, when Astra UHD test stations.
Possibly each device needs its own individual approach. Therefore, I recommend that you even tried what is easily the best one. Biggest complaint here is the Clouding is seen but only when completely black image and a dark room.
2. Sound
Ok for TV speakers. But if you want a good sound you should connect the TV to external speakers.
3. Smart TV / Operation
Tv responds quickly to inputs. Use in Smart TV only max cathedrals. Also it works flawlessly. One should, however, connect the TV via a LAN cable and do not operate over WiFi. Have found that therefore the quality is better with max cathedrals.
4. Application
May have fesstellen no defects. Looks good. However, everything is plastic.
5. compatibility with other devices
Again, almost everything is working properly. The PC image can be transmitted via HDMI. Play photos from a USB stick or movies from the external hard disk is not a problem. The only drawback is the connection of the smartphone. This stutters or is not possible at all times.
Want daruaf point out that I am not an expert. I just only in detail with this topic is concerned to find the best to get out of the TV out. If someone sees still doubts or options during image may report it gladly. Gladly also euere complete picture settings.
