I got my camera but gained because it offers a very specific function -> Motion Detection. Here there is a possibility that in motion detection that works well, a video of the event from max. 5 seconds via e-mail sent. Unfortunately, this does not that.
It will be sent a video of approximately 20 seconds before the event. What is absolutely meaningless, because it is nothing to see. The actual movement can not be seen. An inquiry to the support found nothing. The error is described in other forums.
Addendum on 30.3.2011:
Since about two weeks, there is a new firmware version 1.7, which can be installed quite easily. All settings are saved.
I was about my request to the support a little too impatient. This resolves the problem that the transmitted or stored with the film segment motion event is out of sync. Thus, the basic functionality for my application is ensured and the price / performance ratio is thus. There are to my knowledge no other camera in the price segment that can send video clips. My original review was coined to firmware version 1.5.
There are currently with the firmware 1.7, two minor problems. If these are also resolved if the camera perfectly:
1. It may be recorded, no sound. The video is silent.
2. The length of the movie clip is very limited: At present, only a maximum of 5 seconds of film after the motion detection are possible. In addition, automatically five seconds of movie motion detection is broadcast. In my opinion, this is a meaningless. The movie the motion event is useless, because it logically nothing to see (he has no movement occurred). For that I would have liked the film length after the motion detection longer than 5 seconds to choose (eg 30 seconds) the possibility.
PS If anyone knows a way to mount a fisheye lens I would be very grateful.