The protective cover makes a good impression and like - if ... yes if you get them first mounted ;-) The description is missing namely and how to get the tablet in the silicone sleeve is first not so apparent because the color, soft silicone edge is mounted on a black sturdy hard plastic frame. So here are the instructions: the scharz hard plastic frame is actually two frames, with one part is a dünnrandiger front frame can be removed from the thick side and rear frame. For this purpose the thin bezel (the part that directly display the framed) easily to the screen center towards press and deform. The thin bezel has 4 retaining lugs which are inserted into receptacles of the rear frame and the two parts together. The tabs can be so out of the slots in the rear frame press, and the front frame with the glued protective film can be solved by the rear frame. The transparent protective film, incidentally, is part of the sleeve and is glued into the front frame. I have removed them because I have applied a screen protector to the tablet. Nevertheless, of course, the glued protective film protects the tablet better va probably even against children spilled drinks eg ;-) After removing the front part of the soft silicone frame around something pull the rear frame and the tablet may appear to fit. It fits perfectly into the rear frame. Subsequently, the silicone sleeve again put on around on the rear frame and the front frame Reinsert.
I hope the description helps someone, even if it is not easy to understand without photos ;-)