I currently have a cross bike with 28-inch Befreifung that brings on dieWaage roughly 16kg and Stand holds the wheel in position einfandfrei. If you mounted the wheels or removed, then of course you have something potter carefully, because due to the high leverage of the stand may start to waver yet but it is critical to not waste time. Full stop is the one can not, that would require a holder, which is anchored in the ground, which is problematic in rental properties.
What I liked:
The "gripper", which includes the frame is completely grummiert and with one hand be tightened, so that you also may alone clamp the wheel. The thick pipes make also a very stable impression and the rubberized (so that the paint is not damaged), yet magnetic coil storage is also very convenient.
What I did not like so much:
The screw rack is inserted into a fixed orifice at the standpipe, ie the tray can not be completely free to align and you only have some degree of flexibility. So if you are the page changes when working on the bike, you probably have to always under the bike through cross to get to the exit tray can also standpipe be something in the way. It would have been better if the storage would be secured by plastic sleeve, then you could look position by 360 ° around the support pole around. I hope you understand what I mean. :)
Conclusion:
I would recommend the stand anyone interested without restriction, the occasionally screwed onto his bike. Those who do something full time, but should buy a stand that is anchored in the concrete floor. For the hobby use the device, however, is great and highly recommended.