On Monday appointed, on Friday was the goods already there (Austria!), So a good start. Unpacked and installed (manual really is not necessary, I give a few tips to mount later). All parts were there, nothing bent, screws completely. Toller folding Bock, very stable, good quality, much better than expected, I am just thrilled. I can understand the negative Comments not understand at all from other buyers, in any way. I bought 2 folding trestles, because I wanted to make a workbench that I can fold up after work. Then I put a formwork panel and the cabinet was ready. Very stable, robust, well made, no squeaking or similar. Very well painted, galvanized parts all right. I recommend that part with conviction. Installation tips: First, the sort enclosed screws, that's half the battle! The 8 little for the bottom connection plate that the 2 red "A" parts connects miteinender. The First mount (Tools: Phillips screwdriver, ratchet socket wrench with 10 mm). The 4 large screws on the top bar, to Take 13mm socket wrench and box wrench 13 mm. Finally, mount the middle (galvanized) bar, it requires 8 mm socket wrench and phillips screwdriver. Here be careful because of the locking plate you need the 2 remaining large screws with short thread. That's it, thinking everything easier as you start out.