Ideal for rough stuff.

I opted for this Airbrush because I was looking for a small sprayer 2K clear coat. The device has a relatively insensitive external mixing and also does not require a great deal of air. My Compressor makes only 8 bar and 12 l / min. The airbrush I have at 2bar can use to clear coatings without problems, but you should thin the paint a little and it should only be small areas (PC mice or Maximum Motoradhelm). The device should be cleaned immediately after use with thinner, disassembled and lubricated. Then you have something like this for a while.

So to use the clearcoats of small parts good and cheap, since a large compressor is needed.
However, for color applications to use only for priming or full surface spraying.
The spray pattern is similar to that of a spray can.