The light comes well packaged and safely to. The lower part is then quickly attached to the ceiling (4 screws). A quick screw the two glasses - oops, because it was over. In one of the two mounted in the bottom of the supporters thread was not cut properly, so that the next holder partout not read screw. I had a M4 screw tap, the certainly not everyone has at home, therefore the following fitting tips: Once assemble 1. luminaire from the ceiling mount on the table. Is that possible, which then goes to the ceiling (Otherwise M4 taps or return) 2. The set screw in the adapter between the mirror frame and cover glass is screwed. He too far furled during the installation of the mirror frame in the intermediate part while screwing, the final screws (with ball), which are intended to hold the glass, screwing up contact with the threaded piece in the intermediate piece, after unscrew the mounting of the cover slip again while holding the intermediate piece.
If the lamp is then on the ceiling, it looks quite good, with two LED lamps (not supplied) fitted also makes them quite ordinary light. The installation instructions are quite economical, the mirror frame comes in this front not only the cover glass. Since the light is only once installed and then not soon, there is only one star deduction for all inconveniences.