Delivery and packaging were quick and tidy - not a criticism. After studying the manual, the drama began: Clean + bumper insofar OK Stop and look at how they can be centered and symmetrical is + film, as far as OK Pull + foil and keep up with completely stretched over the bumper and then lower it to the planned position, for me that was already the first challenge to remain without glue to make the right position, because should not be located directly this, the film can be only extremely difficult to solve again and reposition. That's not the problem but that when releasing the film either "distorted" or tearing. Especially at the edges of the foil can not stick flush when you have to solve them once. With a plastic squeegee (not included), the film must be edited to eliminate air pockets, unless you have a problem, in turn, however, can at the edges due to the carbon structure no clean adhesive edge produce. When loosening is then torn with the film at two points, although I was careful. Result - a purified bumper and a torn sheet. Therefore hiked these invested almost 13 euros directly into the bin. The items I can not recommend therefore.