- Fast delivery
- All three parts correctly packaged incl central screw, plus there is still a "tripod" (like the inside of a Mercedes star), which can be used as a backstop for fortifications..
I use it with the Raspi Cam "Noir", fits very precisely into the receptacles, without screws, is firmly fixed by the closing of the two shell elements around the hinge pin of the lower part.
Although the cam lens sits not exactly in the middle of the exhaust port, but nothing is live. The hole in the case for the "Recording in progress" LED on the CAM sits exactly in the correct position.
"Clamp" The two halves of the upper part of the hinge pin of the lower part exactly so that the position is held (open angle), without you feel, now breaks off no matter what.
A moisture barrier is the case quite clearly * not * on the back are free cuttings for ribbon cable inlet and the component-block on the board back panel.
It is still a small square "Velcro" about to 2x2 cm, so that one could fix the housing quickly Velcro-bar (both sides Velcro, both self-adhesive)
Purchase in date March 2015 clear recommendation.