The "Stripper" you can do the following:
* Stripping power cables
* Stripping power cables that are located in a flush-mounted socket
* Cable Stripper
* Stripping of individual wires (6 different diameters)
* Stripping power cables along the length
In addition to the "normal" stripping I find especially the stripping of cables in wall outlets very good. Simply open stripper, cable pure, close Strippers, once left - turn right again and you are the three wires-free - undamaged course. Just awesome. The stripping of individual wires is carried out in the same way open. Device, insert the cable, connect this unit, pull off and finished.
The stripper can be closed by a slide button, keep it closed. So you have to keep both parts not always. Every now and then you need sometimes a knife that has the Stripper in itself. The knife can be raus by sliding knob and go inside.
Now the only negative and therefore only 4 stars: The Strippers it should be possible, a power cable along the length of stripped. Unfortunately, that has never quite worked for me. The power cable is re-inserted into the machine, but this time at a slight angle. This is especially an opening exists. Unfortunately, that's a pretty rickety affair. Then you close the stripper back and pulls the cable through the device. Unfortunately, the blade cuts only superficially on the insulation along. A loosening of the insulation is thus not possible. Especially important this feature is not in my opinion anyway. The insulation around the three cores can be also with the "normal" Abisolierungsmethode slightly from those released or deported / turn.
Conclusion: Highly recommended!