Initially well now problems with the steam

After less than half a year, a sealing ring is torn on the filler neck, also emerges from the Iron unintentionally of steam even if the steam button is not turned on the iron. The button itself is a little shaky, but otherwise ok. The steam sometimes comes with a (in my opinion) too much pressure from the iron, so that it sweeps away the garment from the ironing board, and sometimes does not come out but only water vapor out, but this is not usually the case.

I find that Nachfüllleuchte is also quite unnecessary, because it only goes to, if there is no more steam comes out.
It should be noted that the steam line of ironing system is pretty hot to iron.

The iron has been tested extensively nine months in a 2 person household.
In addition, only distilled water was used.
There are two star, because despite the problems still can iron with steam so.

Conclusion:
The initial enthusiasm about the device dampened relatively quickly because the steam increasingly caused problems.