But if you have just assembled a MALM chest of drawers, you would already want the guidance would be a little clearer. For example, you could add to the guidance that the two narrower boards without rounding each represent a back part and the front lower board, while the wider board must then be screwed back down and so the distance sets the wall. We had an unfavorable road sit in one place for screws, so we had a bit of work around it and now everything is not quite justified.
Overall a nice, well thought-out product that is unbeatable price with the MALM chest of drawers, because you can then continue to use the commode more sense than the usual changing tables.
Our top panel from MALM is higher than the front board of the changing mat (see left photo on the right side - the light board is not as high as the record of the dresser). It was therefore not possible to screw the changing mat from the bottom with the supplied two plates with the bureau. However, since the changing situation could actually move only sideways (you have to first create), we have the plates can simply be screwed right and left onto the support - but not connected to the dresser (right photo). This it is tight now and we also do not have holes in the dresser.