Just goes as flat

I had a Humax HD Fox gave up the ghost, and therefore needed a new one. For 69 of the Nano's relatively inexpensive (when the 50 considered for the HD + card). The picture and sound quality are very good as the HD Fox. Construction and installation easy. And that's it.

The HD + card looks a centimeter from the slot, hm. No display, so no clock or channel indicator, only a red / green LED, on / off switch, CH + and CH-, hm. The remote control is unlike Fox HD, you have to get used to it to halt. Unfortunately, can not adjust the volume even switch the transmitter to the directional pad. Why they took that out is beyond me. After installation, I wanted to transfer via USB backed by Fox HD 100 specific genre stations and found out that the nano no station import or export support, Ups. Doing everything by hand.

And now let's go, turn. The red LED goes out and 16.1 seconds nothing happens. Then the green LED goes on and on TV shows HUMAX. I thought perhaps been completely switched through switching on standby the unit. Very strange. To switch from standby to the image needs of the Nano 35 seconds. This is not unlike the HD Fox. Turning off going for it afloat. The HD Fox has since probably rumgerödelt 40 seconds. Even the immediate reconnection is afloat, namely takes only a few seconds. The Automatic completely off I turned off because the phone may take well to the 4 minutes (not measured). To switch to guide it takes 2 seconds. Like the HD Fox are then only times no broadcasts in the grid. Only gradually, the grid is based, namely only when you call the appropriate channels. Partially also allied channels like the third programs. That's annoying. Switching: very tough, WDR on Das Erste HD 4 seconds RTL HD to the first HD 3.7 seconds back for 5 seconds RTL HD on SAT 1 HD 3.7 seconds. Roughly speaking, between HD + stations for about 4 seconds, between HD channels 4 seconds and from HD to HD + 5 seconds of HD + HD to 4 seconds. That's long. Especially since many switches also the picture is black and the short guide is rebuilt. The pre-marking, here called memory of shipments goes smoothly, it is a reminder later (the program will begin shortly) appear (although quite far and not "shortly" before the broadcast) which will be confirmed - or just canceled. The Nano automatically and time switches - however, between insertion and switching 15, 20 seconds. That can come before the idea that something is not working.

The picture is very good. 9 or 4: 3 is not, however, the automatic image adjustment of 16 works. When HD Fox went smoothly. Now I have to manually switch on the TV, as well as the 4: 3 or 16: 9 marker cometh not, so the automatic image adjustment of the TV did not work out. Two automatic adjustments easily undermined.

Dolby broadcasts a logo is displayed briefly. The information on the transmitter can be adjusted in time. Then an indication of the receivable with the Nano additional program of the station is still on the bottom right displays, media libraries felt etc .. After 30 seconds it will disappear, in fact there are only 8 seconds.

Since the Nano Conn @ ct the same cost as the Nano but comes with USB WLAN stick, I have of course taken the. The website is currently not used by me, therefore no statement possible. The installation of the stick but went smoothly. A hard drive I have not yet been connected, which remains open.

Given that there are in HD + satellite receivers hardly inexpensive, functional selection Humax is probably the only bearable choice, with 69 well priced okay. From the service one can expect nothing, absolutely nothing.