+ Water does not boil even at maximum fill over
+ Austretener steam does not enter the vicinity of the accessing hand
+ The water container (sidewall and bottom) is in one piece -> rounding facilitates cleaning
+ Temperature controller displays by lighting, if the water is already the desired temperature (at least approximately)
- Auto Power Off works so far that the stove always stops at desired temperature to cook. However, the lever jumps in my device in the OFF position when the water has boiled bubbly, even at maximum fill and reaching the desired temperature (up to 96 ° C I've tested). The kettle starts, after cooling of the water below the set temperature, the heating again. One must always remember to manually identify the maker, as the unit will start in the endurance test.
- The thermostat is, as already described quite inaccurate. Something 1/3 of the display corresponds to 100 ° C (at maximum fill level). Do you need a certain water temperature, to get to an external thermometer probably not around and have to approach to the desired value.
- You can not leave the lid open for filling / cleaning
Despite the shortcomings, I'll keep the stove. Let's see what I'm thinking about one year ...
