The glass can be easily and bubble-free mount. For this you have only to a clean and dust-free work. A wet cleaned one table tablecloth in a clean room and not just before the beat pad or something.
- LCD Clean (alcohol and microfibre cloth are)
- Free glass just above the clean LCD of the protective film and place it on the LCD
- If you can, it stores careful you initially press the side with your fingernail against the rim of the glass and place it perfectly centered
- If it fits, briefly press the middle of the glass and watch as it firmly attaches itself. At the edge even helped along and it sits!
If you do not get told it will not notice it. It looks like it would have already been delivered so! Restrictions on the appearance or operation I have not in the twin-g (2) I have so equipped!
If now scratched the glass then it is just the protective glass. In many cases, the protective glass will break the fall, but the LCD survived meisst! A TPU case is still certainly not a mistake, because it is the sensitive edges are better protected.
If the protective glass is scratched or broken leaves it (eg carpet knife blade) Carefully lift at a corner with the thinnest possible diameter. Just as it has festgesaugt can slowly lift until it is released over the entire area it now. There remain no residue on the LCD, and you keep the LCD kannso long perfect scratch free.
Addendum: I am sorry to see that the sensitivity of the touch is getting worse by the protection glass. Especially for people with less fat fingers or the people that is working very fast and agile on the touch then uncomfortable! Fast wipe is then displayed as a number of individual contacts and entries recognized at the edge often not immediate. I have a similar protective glass on my SONY Z1C and there I have not the problem. I can not say whether it possibly it is in this case simply means that the touch from MotoG is not optimal anyway, or whether the glazing is causing a problem, but it is not generally usable for everyone.