Many assembly there was not as Denon X4000 appears as Monday device

One thing first. If the AVR X4000 work, it sounds really good!
Unfortunately, that has not done as my so good.
The unit was just under half a year in Einsatzt and now needs to be returned since all else fails.

- At the beginning I had problems when connecting laptops / computers. Although 1080p was set, only a spongy image came about. Only 720p worked. This could be readjusted with different laptops. According to Denon not the lies on your device. I then used as a comparison to 3806 and could not.

- After 3 months service suddenly nothing more came on the appliance. Not even the display of the AVR has shown something else. After consultation with my Denon reseten to factory settings has been recommended. Only after several reset the AVR has shrugged again.

- With automatic calibration the automatic recognition whether the speaker is connected properly, it came about that the Denon iron at 2 speakers claimed the phases were reversed. Repeated check the cable revealed the Denon something does not get to the series

- Finally now the AVR has been finally adopted. When you turn the tuner to the AVR roared suddenly going on for 4 seconds at full volume and then was the end. Then went nothing more. No sound, no picture anything ....

Now I have finally launched the warranty processing enough of the part and on Amazon. Respect Amazon against it went smoothly. However, I was told, because the AVR no longer available is I get no other device but the remittance of money. Repair is not made. Apparently white Denon what kind of crap they dumped on the market and can / do not want to fix it.