+ Optics: very valent impression
+ Haptics: Also very valent impression only the plastic applications act rickety
+ Mechanism: silent pan with just proper resistance
+ Diversity: 75 ° option very agile in the vertical axis; 90 degree option very large swiveling range.
Disadvantage: You have to decide between one of the options
- Price: Regular Price are nearly EUR 130
- Equipment: No tilt mechanism, these can be retrofitted optional (EFA8810 for S / M).
Background:
-------------
I fastened a Samsung 37 "(LE37B530) weighing 12.4 kg (without stand) on a brick wall.
Introduction:
-----------
Even before I looked on Amazon, I can inspect the wall mount at Saturn, since some were attached VolgelŽs wall brackets.
I have written here, despite reading the reviews decided to purchase the EFW 8245 (Motion + M). After it has been some criticism, I was skeptical.
The delivery took place on Marketplace, because I had purchased an exhibit. Here really everything went perfect: So how it is otherwise used only by Amazon itself.
The wall mount arrived and was inspected critical of me. There were no signs of use to discover, so I got down to the assembly.
Time: about 45 minutes. (All incl.)
The application instructions described herein in at least one review as problematic, which is why I looked exactly.
In summary, I can say that I have about 45 minutes needed for the whole assembly incl. Drilling holes.. Only when marking the holes I had help.
Installation of the wall mount EFW 8245
---------------------------------------
In Detail:
The guide is a picture book, text one searches in vain. But that is not necessary. If you study the manual in peace, you do nothing wrong. One has to look closely at what is the right choice for personal TV because VogelŽs has some different optional mounting possibilities that are then marked as "Optional". Attaching the wiper-like support on the TV itself was not a problem and went quickly. Before a riddle me briefly presented the spacers, which can be installed optionally. However, this is only the case if the TV is behind the mounting area is not flat, which for me however was the case.
Then I went to the attachment of the mounting plate on which the TV rests later.
There are 2 Möglichkleiten to fix the plate. When the holes No. 2 and 4 (the holes are marked on the board with digits) selected, you can later the TV up. 75 ° turn, but he is even more flexible rotatable in itself. If you choose the 90 degree option, a lever may be required to offset and it must be the holes 2 and 6 occupied. In this position, you can actually turn it 90 ° to the TV to the wall, which should be pretty good in narrow rooms, because you can get away from it as TV. In the 90 degree option swivel area is indeed larger, it is the swing portly - the TV is nocht more rotatable about the vertical axis, without having to move your whole arm - and thus also increases the distance from the wall.
One should actually perform the attachment for two. Alone it is also, however, a seizure.
In the support plate a spirit level is integrated. Since I had read in the reviews that this was unreliable, I'd rather have again been measured with a large spirit level. For me, both results were in agreement precisely. So penciled and ans holes drilling.
I do not know if I got the original anchors (as I said it was an exhibitor), at least I have this put to a test of patience. For although the anchors stand S10, but this did not fit into the 10 holes that I drilled into the wall. After I had the holes with the drill bit dilated, I was able to beat the pure anchors gently with a hammer. The monstrous screw could then be screwed very well. Also included: The screw heads have cross slots, so that you can screw the reindrehen with a large screwdriver in the beginning. But is then necessarily a nut + gun required (size I forgot sry). In order that the holder depends bombig on the wall. And as long as you do not have cavity wall, making the holder - also thanks to massive execution of the swing arms - the impression that he can do pull-ups on it.
I can only confirm that the amount estimated previously either good (I did it) or should measure. Because of the TV hangs otherwise rather flat. For me it was not the case, leaving only the TV had to be brought to the mounting plate. This really is child's play and to cope alone. The attached to the TV vertical rails have up noses. This simply depends on the upper edge of the plate. Then you can still center a little. Then there is at the bottom of the TV attached to the rails small clips (slide switch, thanks to the spring itself lock up). This is pressed down and click into place at the bottom side of the bracket plate. Finished! Hurrah!
Pivoting expires completely silent and with me the TV has no game. Very classy!
But I wanted more. That's why I had the time allotted for this type mount tilt mechanism TILT MODULE S / M "EFA 8810" ordered. I actually find it in this price category to say the least an insolence that VogelŽs these - entirely self-evident - function can again be remunerated with almost EUR 20. Well, what the heck.
Installation of the inclination mechanism EFA 8810 (optional)
-------------------------------------------------- --------
The tilt mechanism was one day after application of the TV. Now I was on my own, I still dared it.
The hardest part was the decrease in TV alone. You have to press this (the sliding clips) down and indeed both at once, so that man can lift off the TV up the click mechanism. I have somehow managed.
Then I had the support rails at the back of the TV again dismantle (it's perhaps even without but that is a hassle). It is therefore advisable to mount at the beginning both when it has before. It takes only one screw, namely above. Below the inclination mechanism is previously pressed into the clip, then screwed up. The tilt module is also working very valuable and is massive. It has been on the "back" again the same clip system that will be clipped in place of the tracks on the disk. By this placement of the module of the TV is again about 4-5 cm from the wall in the room. In addition, the entire mounting solution no longer seems so massive now, because by the distance from the holding plate to the TV slightly protruding from the TV rails bend slightly.
The same clips that are provided for locking, have now each a long cable tie. When you pull on it, the shutter opens. It was criticized in a review that this work not mature. In fact, these "bands" very helpful - they could presumably. omit (which you then would cumbersome to the release). The TV was so well incorporated sounds from me alone, which represented no problem at all. The TV can be with some force very precise and well-prone (and upward [but who wants that ?!] and below).
It is also not so that the tilt angle would be adjusted by pivoting on its own.
Now I have the perfect for my needs wall mount and am very happy with the user.
I can not even testify about how the cable management system proved its worth with the plastic applications because currently the cables hang with me yet simply shut. The background is that I move soon and did not want to elaborate now attach a cable duct in the old apartment.
I hope this review was not to information overloaded helpful for potential buyers.
