Especially nice, the holder shall not be considered. A designer here has certainly not worked and if they do, that was nothing.
But when you consider that most Car Mounts are ugly, I do not want to pull another star for that. Because most mounts are made of cheap plastic, poorly finished and moreover difficult to handle. All this is true in the smallest way, in this bracket.
It is easy to apply, holds bombproof. The small thin metal plate is inserted quickly between your phone and the battery cover. In my case a Motorola G with an original Motorola Grip Shell Cover (ie: the original cover with side rubber). Despite the contribution of the plate there were no problems when closing the cover.
The phone keeps very well to the magnet. However, this support is intended for the on-edge position. Those who prefer to have a landscape orientation, you should look for another bracket.
Some smartphones may by the magnet of the screen on or off. Many smartphones have a function that turns off the display when it comes close to a magnet for a magnetic flip cover. The Motorola G also has such a function. Under certain circumstances, the placement, the magnets can cause the display can not be turned. This is only the case when G Moto, if one "staring them" in the upper region of the magnets. In a noons placement or at the bottom there are no problems. Therefore, this is not critical.
Assemble one does the holder by means of sanctifying small wedges that you push into the gap in the bracket is to be plugged. Then take one of the enclosed transparent plastic plates and pushes them together with the holder in the gap. After removing the wedges, the column presses and holds the mount firmly to really without anything would have taken damage to the car.
The best installation is likely to be in most cars the gap between car radio / air conditioning and glovebox. The glove box goes with me still just so on, without any prejudice to the holder. Should it come into contact with the glove compartment lid, you can easily bend the bracket to the front.
Rubber studs around the magnets of the bracket ensure that the smartphone is protected from scratches and magnets do not have direct contact with the battery cover.
The position near the glove compartment has the advantage that you can reach the phone there yet. In addition, it is particularly close to the cigarette lighter in this position so that the cable is not across the car leads (like me before in a bracket on the windshield).
The mount extends when attaching the side of the glove box slightly in the front passenger footwell. But so that the passenger does not therefore come into contact (ie, the knee does not abut). For me, Audi A4, Bj 93rd
What advantages does the bracket now compared to other solutions such as windshield or ventilation grille:
- Is likely to be suitable for most mobile phones with removable battery cover - if not, it works using an envelope
- Therefore, no size limit - once purchased and can be well used for all future smartphones.
- No long cable runs
- To achieve good cell phone
- Not impair the visibility / no affectation of the ventilation system
- Quick application with one hand - also releasing with one hand.
- Sits firmly and stably. Phone easy to operate.
- Well made.
Overall, I am satisfied with the support, even if they do not deserve the beauty and price is expensive. I have had and tried many brackets. This one in my opinion is the best solution. Therefore, the product of me gets the full 5 stars, despite the high price.
