Now that I need DirectX11 and Sapphire only 10.1 may I never imagined the ZOTAC GTX 980
Amp brought extreme. Have now 7x more power than before. Not only that the ZOTAC DX12 can to. !!
The installation was an interesting challenge because I only have about 1 cm in Antec lan boy air space to the outer wall. And then had to be cleared of clutter.
eigendlich I do not know myself yet exactly how I got the monster in there.
But is indeed done.
Drive up
Map was immediately recognized.
Install driver has worked without any problems.
The map is in the beginning quietly and gaming fans will also not during loud.
I would estimate about 15 decibels
because the Noctua NF A14 PPC 3000 are on my WAKÜ louder.
Firestorm (the program from ZOTAC, with which one controls the OC + module on the map)
Works on the simple Prinziep: learning by doing
There is no manual included, but only a multilingual installation manual.
A DVI to VGA adapter is still there and the 2 cable per 2 6pin transform on 1 8pin.
The performance I need not mention here, yes. The you will also find somewhere else.
DSR I think improves the non-image but it can become blurry.
Vsync should turn on because otherwise I always have in any case an offset in the image.
At Titan case I've consistently 60FPS
more can not the screen.
after the 1/2 I already have the card, the thermal conductivity of the WLP has greatly diminished.
I had at Titanfall 85C °
at the temperature clocks down the map to 1GHz
but still 60 FPS
have now replaced by the Liquid Ultra the WLP.
will soon block water cooling.
in permanently above 60 degrees takes the life and performance strongly.
as I have on my not guarantee more
I pay by PCGH instructions in the BIOS, this set
GPU 1442 MHz
3700 MHz Memory
+ 0.005V
max. 475 W
200W per 8pin and 75 per PCI Express
If you have questions, then asked quietly.
Or just comment.
The Facebook Crafter
