Unfortunately, there is a long way until then. I had ordered twice because the first time a hook was missing a shelf mount and the soil is therefore hanged by side. In addition, a metal part stood before the extent that another floor could not be folded down.
Order number two was in this regard OK. However, an immediate hanging is not possible because neither mounting material (plugs, screw), somewhere or similar eyelets available. Say I only have to pre-drill holes in the metal through which I could hang at all. Thus, you already needed himself once
- A metal drill
- Anchor
- Screws
- A drill
- And a screwdriver.
Also, one should not be relied upon, that the distances of the rear struts are symmetrical. First I wanted to measure the hole spacing and drill into the wall, but I noticed that they differ to 3cm (!!!) left and right. So better keep to the wall, measure with the spirit level and then Mark, (2nd person required) when the holes get into the wall. Otherwise, everything is wrong.
Oh, and the metal bow above were from me partly backwards. This I only straightened with pliers. Otherwise I would have the shelf can not plan screws on the wall.
All in all, now that it depends, really great. However, really questionable what the processing concerns ... I have never experienced ... With a bit of DIY skills and 15 minutes extra-but easy to solve.