The hinged-lid keeps reliably inserted in hard drive, but can
additionally be locked (key enclosed). Recessions in
those of a selbsständigen openers the unlocked door
is reported, I can not confirm nor the "Herauskata-
pultieren "hard bar by the spring force when opening the door.
Via an additional switch on the front of the frame can be completely
are de-energized. So it is possible to set up a disk only
then to switch on if it is to be really genutz.
Although the framework is also "hot swap" be capable, ie you can
supposedly the plate replaced during operation, but I go there
no risks and prefer to use the said switch on the frame.
In a normal SATA mode under Windows, this option
already obsolete since the hard drive just used did not recognize
becomes. You will be registered only after a restart of the computer in the BIOS
and set up for use.
Who the frame so for backups, data export to more
Flat traveling or used to use several Betriebssystenme must
when switching on the hard drive always a re-boot of the computer
schedule.
But that is not a problem this exchange framework, but also in
SATA Mobile Rack of other providers so because you directly
engaged in the hardware management of the computer - so different from what it
When connecting a USB hard disk would be the case that a private
Hardware Controller brings and only on the software environment
(Z. B. Windows) logs.
A deduction of points, there are still:
For the price a SATA cable would have been possible. Also
is the cut-out in the metal on the back of the frame unnecessarily
narrow so that you plug depending on the thickness of the SATA problems when plugging
the power and data cable gets (tighter fit). Especially
when the SATA connector is not placed exactly behind the neck and
- As in my case - the board (electronics) of the frame after
Port a little "mechanically powered" is. While that is still
not critical, otherwise I would have complained about the scope, but preventable.
