I have the chain on my Dolmar PS 32 TLC with 40 cm rail used and approximately 7 cubic meters of wood (cut trees) in handy 30 cm blocks for chopping sawn in one day. The chain was not dull and I could thus cut even further. There were tribes (beech and ash) with 30 cm diameter. Three or four were even thicker than the track long but the chain was that too easily. Even when the track was completely disappeared in the wood when sawing nothing is stuck. I've had a few other chains from the hardware store, but that I would have with three chains failed to saw the 7 meters. For the price and the quality you do not need to think twice. The chain I can only recommend. The Multicut saw chain from Oregon can experience, what is able to do even a small chain saw. A small note at the end yet. Please do not bring the beautiful chains for machine sharpening, otherwise you would not long what it. Manual with Feile, you can sharpen about 20 times and in automatic sharpening the chain after about 4 to 5 times raise scrap. Since you have a bargaining unit after approx 7 times sharpening out if the dealer machine costs about 4 euros. And sharper manually sharpened chain also. As described, the chain for the price the best you can get. If one considers the division, part of members, half chisel and groove width, one can use the chain on each chain.