First, the different variants:
There are Pandora chains with clips and chains, screw caps (the latter is the order that they are here). First, to the disadvantages of the thread chain.
On the one hand one must always remove all items before you can attach the chain. The use of a chain of two different bracelets is thus for example not very practical and should the chain - if it is first attached, best left at this bracelet.
On the other hand the bracelet turns carried by the arm movements so that the chain over time screwed by itself from the thread. However, this does not happen very quickly, so no need to worry about having to nachschrauben every 30 minutes. Also, does the "problem" of its own accord once the bracelet is full or nearly full, because then the remaining elements are always on the thread, so that the chain can not rotate down.
This brings us eigentich already one of the strengths of a thread chain and the reason why I decided to clip and for the thread. The clips can not be clipped on the two end threads, but are directly mounted beside it. Thus, the thread always remain free, which I personally do not think so beautiful, when the bracelet is otherwise fully. The closure, which would otherwise act so at first glance like an element, is placed in the center unattractive by the two threaded holes. In addition, "block" the clips two places on the strip, where else could hang two other elements.
Of course, all this is subjective and some people may not be bothered by the threads. As some but always think the clip chain will attached to the threads, I wanted to clear up this mistake here times.
Now for the lengths:
No, there is no rule of thumb, with which one can determine the optimal length of the chain by remote diagnosis. If you have a very narrow wrist and kräfige hands, you may need only a 17mm bracelet, but a 7-centimeter chain, while others have a very long bracelet, but a short chain. Plotting his bracelet though very loose, then the probability is high that you need a short chain. If the bracelet at very closely, you will likely need a longer chain. Why is that so? Because the meaning of the chain is just to get the open bracelet with chain just as on the hand (like a bangle with no closure, which is just so big that you can force the hand through, but does not lose him in everyday life ).
Someone who already has a well-fitting clip chain, may incidentally like to pull off one centimeter in the thread chain, since the two ends on the belt so are sitting closer together on the thread and.
Sense of security chain:
I must confess that I was initially not quite convinced of the usefulness of such a chain. Meanwhile, however, this has changed, because I find very adorning one hand and the thread underlying hate see you on the other hand think this is extremely convenient.
The Pandora closure I trust the way I really do not know anyone whose bracelet is simply risen so. The situation is different when you open the bracelet itself or attempts to create it yourself. Precisely because of the closure is a bit tricky and often stuck and a pretty full bracelet also is quite heavy, it may quickly render it a case slides from the fingers. I initially my tapes only other sitting for this reason on the lap or stored, because my girlfriend two times Murano actually cracked on the bathroom tiles in such an action. Since then I have the safety chain, can I fiddly thing of arrival and depositing finally done easily and without special care.
Finally one last note: The chain has a freely rotatable joint, which you do not fear that the chain twisted at one end.
As for the length, so I can only advise everyone to try on the chain at a jeweler and find the right length. It may even be that, if one has two bracelets in different lengths and different chain lengths for her needs.
