Practical and gentle connection

Charge the controller to the console is actually not a viable solution. He invites only, if the thing is also, and usually want to use it then yes. That's why I was looking for an independently operated loading facility. Often there are chargers that have a fixed USB connector and the controller is then "inside clamped" there. The burden on the USB interface and very with my sister 2 controllers have found in this way an inglorious end.

This charging station takes a different path:
To the controller an adapter is plugged in, which also has a USB port. This is then fed into the adapter downwards and ends in four contacts. The adapter allows the controller to pinch in the charging station, the contacts with their counterparts in the charger come together and the device is charging. Because now never a plug must be pulled out of the controller again, the connection is protected.

The controller is firmly seated in the station. An occasional bump it does not throw the same out of the shell or interrupts the Ladevorgang.Der adapter is not to notice when using the controller. A professional player could possibly notice that the device slightly heavier or otherwise balanced now, but me as a normal player can not think here.

A small drawback, however, there:
The charging station can accommodate two controllers. If the station is fully occupied, then allows the rear controller only remove if you also take out the first. This means that you can already try him take out directly, but the required movement causes the front controller is also notched.