My Installation instructions:
- Place the tablet on a clean glass table
- Fix a minimum at the short sides with tape / Kreb on the glass table
- Clean the tablet display, this is a microfiber cloth at
- Film including the protective films hang as it should fit later
- Fix now taped to a short side, the film on the tablet
- The film fold perpendicular to the splice
- Check the display again to dust
- Now pull the lower Schutztfolie, starting at the bottom and flags
- Be careful not fumble the display and the exposed adhesive surface with or touching objects
- Well above slight pressure on the foil so bring the film (still stands perpendicular to the display surface) to
bulges in bonding direction. ) ___
- Now perform the bonding, by driving at maintaining the curvature towards the opposite edge of the fixation _) __ __) _
- Using the enclosed spatula can help out you, but is not necessary Duch the Flap technique
- Remove the upper protective film and adhesive strips for closing
