This problem has not at this smart charger. Thanks to the so-called. AIPower technology recognizes this loader the maximum charging current of the connected device and also provides only as much power as needed.
Thereby 2.4A per port are delivered maximum. It includes, for example on a Samsung Galaxy phone, the charger detects that it needs to deliver 1A. This worked very well in practice. All units have been loaded as this comparatively tested do it with the original chargers. A very practical matter, you just have to plug it in and be more concerned about anything.
The design of the supercharger like it very much - it is 4 square and looks in white in my opinion very good. The distances between ports are far enough so that even relatively thick USB connectors are not in the way. Maximum 6 devices can be charged simultaneously and the unit, a maximum of 10/50 watts. When the charger is required, it is of course a bit warm, but never hot. He also has an overvoltage protection and short circuit protection.
It is connected with a slim cable with Euro plug and therefore does not take up much space in the socket. As funny gimmick, the manufacturer shall have at a small anti-slip pad with (small mat with suction cups), so the loader can be fixed.
The criticism by the standby current I could not reproduce with my Voltcraft meter. If no USB cable is plugged in and the battery charger into the wall outlet, it indicates 0.0W with me. For me the issue is not as significant as I basically charger has an Kippschaltersteckdose
switch.
All in all, I like the charger from both the design and the performance (intelligent control) very well, so I can recommend it.
*** Update 11/11/2014 ***
The charger is with me for the review in continuous use. I am still very happy, no problems.