The delivery took place, including all materials to build, but without appropriate guidance. Ansich not a problem because it should not be that difficult indeed. The three legs were already fixed at the top spot by a long screw, the cross braces attached to each side. Use the enclosed screws had to be different errätselt - which for the struts for the house. Also, do not worry if you have an idea of how it must be installed in order to have the best state. The mounting with only one person turned out to be thereby difficult. The tripod had to be placed neatly on voltage to it reasonably to have in scale for the placing of the house and to sink the screws. It slipped away again. After some Gefriemel it but then folded.
The house itself. It seemed as far processed mediocre and has been supplied assembled. Mediocre, since I am annoyed about some larger knots in the bottom of the feed house through which the lining of course trickles through generous. Since I did not want to again dismantle the feeder and it seemed to me the return to consuming, I taped the holes. While there is a natural product, but the knots were very angry. Logically, the knots are in another Futterhaus not in the same place, if at all be present, but annoyed me the "quality control".