Protector MacBook Pro Retina 13 "

Packing
The protective film comes in a package (similar. Like a smartphone screen protector) in size about A3. Everything to see and unpack very high. The film is very well protected against kinks.

Instructions
She is super clearly written and easily explained in 4 steps and implemented.

Film quality
The quality and fit of the film I guess a for outstanding. It is roughened on the surface properties so far that the haptics ähnle itself. equivalent to aluminum as the touch. Color I see no difference to Chrome the Macbook Pro Retina. All very valuable.

Fit
The film fits like a glove. There are mE corpse overhangs to be heard at the outer edges (not inside keyboard and track pad). What seems to be under a mm however. Determined I have this, I zustzl. a bacon-shell used and so the clips for holding the sleeve, the film a little einpresst at the locations. The thickness of the film is so low that the clips largely but go about it and so everything is good.
The film for the track pad I have not installed, why, I will get to later.

Applying the film
Since the film for my 13 "Retina is quite a large area (a 15 'film I would after experiencing this application do not trust to install) I have attached a precaution with my wife shared this. Including through the strong adhesion of the film. The corresponding large surfaces it may happen that adheres by the weight of the film this at locations which you still do not want to be liable. Therefore, a second person has held the film up. Personally, I had to repeatedly pull back, which unfortunately brought with the effect that these first visual impairments left in the film (looked like scratches on the surface of the film by pulling again) the film. But the all-clear ... these have disappeared completely after about a month !!!! (Top). We have the solos then slowly rolled from left to right on the MacBook. What's a little unhappy that air pockets are not is to get through the rather strong material quality hardly to out. I put this one a piece of cardboard in the EC-card format. Here helps only the described, possible slow and carried out with the support roll of film. Why do I have the zstzl. Film for the track pad is not attached? Since the film has an extremely strong adhesion (you realize when you try this again deduct) I do not dare to mount this on a moving part on the device but not (optical and color is striking, since as described the coloring to 99.99% was taken) which suggests again for the film.

Conclusion
I give one star less, because it is not in my opinion possible to mount the film in the first and second test accurately without the help of another person. That certainly goes for Smartphone films but in such large-scale films certainly only using several attempts and possibly wearing some films. For my attempt've hammer out as described herein for two. The visual impact of the removal of the film disappears after a little time and bubbles I have only a single which is so flat and small but that myself as a "petty" this does not interfere. It should be noted yet that the film itself automatically up a notch attracts far to the device.

I would buy the film all over again! Thanks for that