Video at Amazon.com See the quality of this speaker stand is unfortunately underground. When my kit arrived, I found that the components were processed extremely inferior. The metal rod, which is to hold the two sheets of glass, like plastic and not metal like feel and also weighs nothing. Must obviously be a very cheap metal. The wooden board is nothing but a> hauchdünneDa the metal stand is further hollow inside, schliest the MDF board also the cavity, so you should not there to push, otherwise makes it equal to "crack". The paint is also very cheap plotted as the metal bars everywhere have black streaks that are not wegbekommt. The rubber coating to carry cables hanging there also only loosely on the hole around and if you are not careful, the Gumierung slips into the hole in and you can build everything apart again. The glass panels can be found in many places smeared glue residues from the production and some chipped paint. The glass itself is probably the highest quality at the whole set. However, the Burner are the spikes. It has been impossible for me to the foot plates to screw the studs so that the panels are straight. The reason is that the threads of the base plates are processed so bad that you can vary the spikes can reindrehen far, with the result that the footplate stands or wobbles wrong.
Who now thinks that it will be an isolated incident, completely wrong, because I have an exchange obtain a completely new set and that was even worse processed and had now quite a few fine scratches in the paint and other fine workmanship. Also here the same problem. The spikes can be purely rotate smoothly with no base plate! Seems to be a common problem because the problem occurred in both sets and with all 4 base plates.
Saving is all well and good, but I would not do that to me again, because design is not everything. The one star is only available for the discount and fast contact! Who is looking for cheap speaker stand and can live with some massive poor quality for the price, for the worth taking a look. But who expects a perfect product which be warned.
Incidentally, I have to keep the stand with the discount, because you can repair the state temporarily, if you slightly out rotates individual spikes from the thread in order to compensate the height difference. Since I do not consider the stand from morning to evening and they serve only for my Speaker Rear, I can get over the optical defects with the discount.