Even without an attached manual was easy to deal with but the assembly. The tip with the extra washers I followed. The locking of the collection basket or pushing up the fuse is actually somewhat sluggish on delivery. The reason is that the Makita base not assembled properly. Upon insertion of the collecting basket in front of the rest of the assembly can be easily seen that the slider is not exactly the pot under the circular recess. The catch tray is in the final position laterally offset (with me to the left) into the subframe. Then, the slide can not later be easily inserted into the fuse. That's why I loosened the 8 screws on the undercarriage, the remaining frames on one side as long as a little load / twisted to the slide from the catcher and the right were cut above the other. Then tighten the 8 screws. Then it's alright. The point deduction gets Makita for the inadequate pre-assembly of the undercarriage.