Prerequisites for use, identifying 3 buttons:
to identify you, put the vertical key, USB plug up, and with the two buttons that are all right!
Call the K1 at the top right, and the K2 just below. Finally the call K3 alone left.
Reminder: the camera is the "big" down hole, and the microphone is right next door.
Operation very simple (after putting your micro-SD card inside COURSE!):
To turn on: press long on K1, it vibrates ok. (To turn it will be the same thing).
Once lit: .To take a photo: support once K2.
.For Film: long press K2 to launch, and ditto to stop.
Create an .avi file.
Sound quality nickel average video quality, but it's going is very correct,
close up as long distance.
K3 The button serves for the auto trigger. motion detection, but I do not have
yet really tested.
Setting the time date (English format), which will appear on the videos:
Contrary to what is stated in the instructions:
at the root of the micro-SD card, create (if it is not already there), a TAG.TXT file, open it with a text editor beast, and
replace what is written in it by the date time format: yyyy-mm-dd hh: mm: ss
(Ie d: year-month-day hours: minutes: seconds, eg 2013-12-31 10:56:00 p.m.)
Areas for improvement in my opinion: a little big for a USB stick, no way to recharge other than with a PC, tracking buttons (and also to learn not to film in reverse) is not instinctive and going ask that we remember or that one starts such a small mark small label on it. Notice some pourrave anyway: poor print quality, and many barratin in English for very little, not very rigorous + errors.
