Moin together, Unfortunately one of the rubber grommets is torn from the strip end after about a month. In addition, the circular cross section of the rubber grommet itself seems to be a poor solution. One fixed so the goggle strap on the temple by the fact that the small coil spring reduces the opening of the rubber grommet towards the temple. This should be prevented from slipping down from the temple. But the material and shape of the eye appear to cause increases again this of itself and this by slipping off the hanger. So sooner or later, dangling his glasses on a bracket or falls down, despite belt. There are glasses bands where these elastic loops are made of transparent soft plastic which are not round but flat in profile. As if these are caused by Zerscheiden a hose. There is the surface which contact with the bracket has greater. The "non-round" shape probably also prevents slipping on the strap and an independent enlarge the opening. Anyway there for two months nothing slipped or torn. Since I no picture to zoom in on the eyelets found on Amazon, I found something on Ebay and ordered.