Simple and effective magnetic strip at an affordable price

The bar is simple, does not look as "quality" like some other bar, for example, from completely smooth metal or a noble "design" for example, round steel edges comes so. But this is the bar very cheap and absolutely served its purpose. It is mounted with 2 screws and 6 dowels to the wall. Here I noticed then a further reason why the bar is so low: the tightening of the screws of the appropriate "screw channel" the bar broke, so that the bar only hanging on one side of the screw, but not by the screw " pressed against the wall "was. This, however, I was able to compensate by placing a small metal ring again. A cut to size piece of cardboard stronger would have done it, because at the bar depend not tens of kilos of metal, and one does not "tear" indeed her around.

Because of the price and the fact that you can fix the problem with the Schraubenkanel fast itself, I give total won 4 stars. Wen optics interfere: my mother I have the bar relatively close mounted to a cabinet (approx 5cm distance), so that you can see the bar only correct if one bends down slightly and "in" the closet look closely WILL - so it falls not everyone immediately apparent.

In addition, the bar should already rather "too high" are attached as "too deep" because when you a knife will "drag on for itself," this will require by the magnetic force considerably more effort than if one of the things simple rather down by bar "subtract" - below should therefore be some space available. This plays a role when you want the bar mounted above a countertop, but nuterhalb a cupboard, as was the case with my mother.

But all in all it is for me good 4 stars.