This bracket has all the settings that you could ask for and should match with virtually any projector. The cardan joint allows independent adjustment of attack and roll angle, the yaw angle is adjusted via a vertical thread on the socket and fixed with a maggot Allen - so you need not set precisely on 10th-mm dowel holes, but can adjust everything on the bracket itself ; That's how it should be. In addition, you can detach for maintenance purposes the lower part of the universal joint, without the screw need to be resolved to the projector housing. Adjustable height, the holder is not, but this is also clear from the product description and is therefore not a minus. Who needs it, just have to choose another product. The total is meticulously crafted and no wobbles slightly when tightening the screws firmly (but watch out that you do not vernudelt's - aluminum is not a Titan and after "firm" comes "from"). Pretty to look at the bracket is also; single (small) drawback is the screws, which indeed appear to contain 2 diameters and 2 lengths, but I had to saw off anyway to come to an acceptable average length that do not hurt the inner workings of my beamer. Okay, who has a workbench with vice, for this is not a real problem, but the highest rating I can not give it, and there unfortunately are no half star ... Conclusion But: 4.5 star fully recommended.