After some exploring on the Internet and various DIY stores I've encountered at Amazon on the Mounty TV wall mount. Due to the yet mostly positive reviews and the low price, I decided to order the part. The delivery then worked very quickly. The holding round is very hard and makes a very strong impression. As some people noticed here, first had to be somewhat relaxed the joint screws, so that the joints to move at all. I find, however, not a big deal, took about 30 sec. The plugs I have exchanged opposite TOX dowel and the mounting screws against longer. I think I've never the supplied dowels and screws used in any part, to bring the part to the wall. I always go on the safe side! IKEA do it right, the supply eg only no screws and plugs with, since they do not know to what kind of wall which part is to be mounted! Otherwise, some screws and washers are provided to secure the TV set on the wall bracket. The screws had to be shortened even with our TV. This is me however rather than when they are supplied with already too short! So the holes marked out, plugs in, bolted wall bracket and aligned, sawn screws for TV bolted to the unit holder, finished! On the whole, a good buy. One should definitely bring something Craftsmanship with, then the TV is in about half an hour on the wall! If the bracket is mounted with the correct plugs and properly fixed to the wall, the whole is a very stable thing for an affordable price! I would buy this bracket again at any time!
