First Processing:
The processing of LED strip per se is OK, cheaper fall here remote, power supply and IR controller. As you can see, where was saved. At first I was given the criticism of the tape in the reviews surprised that this comes from 3M - ansich a good quality. At first one has the feeling that the LED strips would hold quite well. The surprise, however, then come a few hours later when the strip has dropped again. To this end, I prefer legitimately from a star.
For cheap PSU I can only say that it is quite warm, but not overly hot after use 2-3stündiger Although at this point. With continuous use of LED lighting but I would certainly recommend a check here and there.
The weakness of the IR controller of course is that he (in depth) requires much more space than the strip must be attached ansich and uncovered so that the remote control works. So if you have little space factored for the LED strip, you have to attach the controller relatively visible, what the optics a bit annoying. This must, however, consider themselves in advance and is not a negative feature of the product ansich - especially since the IR receiver itself hanging on a short cable. So once you have enough space, the controller can also be good at hiding.
The remote control is tactile and visually not a highlight, but that's probably not for most of the primary claim.
The light:
Here I have been surprised to find that you get this quality at this price! Shades and blends are great, it's almost every imaginable color possible. Only with the saturation you have to peel off and to "play" in order to obtain a strong color, would you want. Unfortunately my order was not "comprehensive" guide (meaning, this was very nearly) at. The most useful information is the short sentence, we must together put the plug connection between IR controller and LED strip at the arrow mark.
For the remote control you need some patience, here helps the DIY instructions for your own colors, which has already posted another reviewer. Should we be satisfied with the default colors, the remote works fine with me. Alone before the first use to remove the protective film on the battery did not help me, but it was done with one take out and reinsert the battery and then the remote did their service.
CONCLUSION:
Would not the weak adhesive tape, you could expose little of the LED strip of Besdata, especially given the price. The best thing to order equal a stronger, double-sided tape with about what the price advantage diminishes somewhat, but one of them is definitely cheaper than a "brand-name manufacturers." The essence, the lighting is great - a strong buy recommendation from me.
