the device does what it should

I bought the device because the user explicitly indicates when a battery vollständigt
is loaded and because it indicates the battery's capacity. In this way I was able to
once 6 batteries sort whose power was only two digits. My previous device has
Always charged bravely, shown no mistake, yet these batteries were no longer
use - now I know why.

But this functional - pretty the device is not. You can load up to 4 batteries. If
less battery load, you should make sure that the positions 1 and 4 for the first two
Batteries are elected. The two middle batteries are only charged when the positions
1 and 4 are occupied. Anders If the display jumps to and indeed shows later "full" on,
However, the batteries are empty. This behavior is also in the clear and brief
Instructions described. (But try new things in delusion one forgets even the
few necessary information ...)

In addition, the top REFRESH modes and TEST. With a push of a button to "display" changes
the information on the display. The first button is to select the mode. The third button
"Current" indicates the charging current and change it if necessary. I, however, do not use.
Each battery is there a different value - because I leave it at the default setting on the device,
the lowest charging current of 200mA.

Finally, I am delighted that the device and the power cord remain cool, the batteries
during the charging process not hot and not be overloaded.

In short: 5 stars.
1 Star that the device does what it should - charge batteries.
1 star for the two useful modes me REFRESH and TEST.
1 star for the display, which indicates to me, when a battery is charged and how much capacity
the battery is. And 1 star for the safety of the device and my batteries.

I know of a shortcoming, I would retain a point, but I am completely satisfied with the device.
So 5 stars.