The Device
The look is simple but wertig - stainless steel and black plastic. The device consists of a total of 5 parts - the base unit, the Rührkanne, a lid with glass insert and 2 Rühraufsätzen.
The base unit is connected by means of an (in some cases, perhaps unfortunately a bit short) cable to the power. The device has no power switch, it can be completely off so only by pulling the plug. However, the power consumption is kept within limits, even if it just remains on power.
Both Stirrers can be stowed tidily into two brackets on the rear of the base unit. So they are always within reach.
The Rührkanne contains a small nose to the ground, to which the Stirrers be plugged. As the unit operates with induction, the pot can be easily rinsed by hand or even put in the dishwasher.
Handling
The device is brought by a short press on the switch on the front of the sleep mode (if it is allowed to simply relax at the socket) and a second pressure of the foaming process is started. Depending on the desired product (foam or warm milk) before a scrambled sentence in the pot must naturally be positioned - this is child's play. Simply press the gear on the nose and you're done - no fiddling required.
Result
We have worked primarily with 1.5% sodium fridge cold UHT milk and are very pleased with the results. However, it should be the min-value does not comply to scarce, rather a mouthful more. In addition, the foam after foaming are short should be left so that he can sit down. Then the perfect milk froth enjoyment is nothing to prevent.
Rating
We are very happy with the product and would buy it again at any time. Since the milk frother is in our kitchen, he has hardly stood still one day.
