There is nothing better than a warm bed

Especially in recent Frost weeks some will have rattled in the bedroom with his teeth. A heat bed can provide relief here. Since you then in turn the heater does not have as high set one can not really talk about wasting energy through heated mattress pads.

The heat bed UB 90 is the little brother of the UB 100, which has an additional header (unheated). Connection and commissioning are very simple. The manual reads almost a little complicated, but the adjustment of heating power and time is really simple.

It is nice that the display on the control unit has very large numbers - one has thought at Beurer that this UB will be 90 operated by the older generation.

Right here should be mentioned that the UB90 in addition to display oriented attitude has a "real" on-off switch. So if even the slightest doubt, if the UB is issued can obtain with the side-mounted slide switch to the desired peace.

I have installed the UB90 between mattress and Matrazenauflage / divan. The UB90 is indeed washable, but it should certainly be only a temporary solution. The lower bed itself is as thick as a rather thin blanket.

For testing, I have drübergelegt normal duvet. After 2 hours heating at full strength I put away the blanket and measured by an IR thermometer, the temperatures.

In the area of ​​UB90, the temperature was around 37 degrees - ie body temperature.
This has proven to be absolutely sufficient, almost a bit exaggerated and the subsequent sleep test - but one can also turn down.

The 37 degrees long so by far and this rather milder temperature ensures that there are no burns and no hot spots or anything else that z. B. may occur in hot hot water bottles. The temperature distribution is also completely uniform.

As a special feature should be emphasized that the UB 90 2 temperature zones features: legs and torso. Both zones can be set separately. So if you want just like to warm up cold feet can turn on only the legs zone.

After the measurements, leg and trunk area seem to work the same. This has the advantage that also in the wrong direction (ie legs above hull below) can lay on the mattress, the UB90. But why would you come to this crude idea?

Now, the electrical junction box of UB90 is normally approximately at shoulder height. Since the box but appears rather to thickness I can imagine that sensitive individuals then are uncomfortable or could feel the can as a foreign body.

In my test sleep the junction box, however, was in this awkward position, also under the lower bed and beyond that I was very tired. Result: the can did not bother me at the current position, although I initially had concerns.

First, I wanted to pull off this one point, but as you can rotate the UB90 yes and can then not bother me has had the somewhat exaggerated.

This U-turn has only the UB90, not the UB100, which still has an (unheated anyway) headboard.

Beurer complained that it was possible with the UB90, the ever-present dust mites at bay zurücken. The theory is that by the heat, the so pleasant for the mites, moisture is driven out of the mattress. Whether the mites can not judge can actually hold by UB90 in check.

Especially for people who sweat heavily at night, the UB90 can also be a means that moisture is then heated during the day out and one night does not have to put in a clammy bed itself. In this respect, the UB90 is not only for but also for Frierer Schwitzer a meaningful thing.