All functions (self-timer, interval timer, long exposure and number of shots - max. 99) can be combined with each other so you can for example easily sek 10 a series of photos in an interval of 15. with an exposure duration of 8 seconds. but only 1 minute and 15 seconds. after the shutter button is pressed to start.
The trigger on the timer has two stages - Stuffe 1 focus, Stuffe 2 trigger - easy to use and not hypersensitive. Furthermore, the trigger also has a hold function for individual long-term exposures.
The display is easy to read and illuminated, so that all settings can be made easily at night or in poor Beleuchtng.
The appearance of the product is rather high in light of the low price.
The cable is about 85 cm long, more than sufficient.
Actually, this product deserves 5 stars. I only have 4 given because the manual unfortunately is only available in Chinese and English. Although the English translation to understand correctly and quite simple, but not everyone can just English. Here it is essential to be improved, therefore deliver a star.
With instructions in German it would have given full marks.
All in a top product at an unbeatable price - highly recommended!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Addendum after 1.5 years.
First battery is still running, although not as fresh (lighting) but is still running. Thus all had have concerns and worry because of a missing power off, said power keeps not worry, the battery.
Unfortunately, today, another problem has arisen. I could no longer trigger the timer. Focus went well all other functions, only I can not trigger. Since Google returns no intoxicating results, I even tried to find the error.
On the battery it is not. Have a new inserted to make sure.
Then I thought it was a cable break, so massaged cable and wait for a response, unfortunately without result.
Next attempt to contact the button dirty possibly. Timer screwed to look up, but the button was not. As soon as I had on the case, since the error was found. One of the cable has come loose from the PCB. To be sure that this is the error, I have kept the cable to the solder joint and pressed the trigger of the timer. Behold, the camera triggers, everything works. Now I'm going to try the cable again soldered to the board.
Why it came to the detachment is also quite easy to explain. When looking at the lid has open you can already see at first glance that the cable too little play inside has. It is placed quite tight and the
Cable was shot after soldering 180 degrees to guide it out of the case. This weakens certain the material and can lead to breakage of the solder connection.
I hope I can solder the cable again, otherwise must be found, a new timer. But would decide this myself despite the damper. Price matches and the operation is super easy.