The functionality of this support is excellent at an unbeatable price, extra strong. 1. Unpacking 2. Loosen the screws of the hinge pins with 17-ner-end or ring and 6-Allen wrench until the desired mobility achieved. 3. Unscrew the two axes of the base plate. 4. measuring the correct place on the wall. 5. were procured attachment material itself, since the supplied 12x60 mm standard plugs with 8x60 mm screws 6 pieces are not ideal, used 6 piece 10x60 mm Fischer dowels and 6 pcs 8x70 mm screws, screws longer because the wall is plastered. 6. Align the base plate as a template with its own level and the holes featuring 4x above since tensile and 2x down (see picture), dowel as far as push until they reach the walls, base plate screw 13-ner wrench, axes with rack back screws on the base plate , holders of TV screw (screws supplied with TV), set the desired slope, mount, connect and ready. Make sure that the VESA measure from TV to the mount is compatible.