After the many good reviews and looking at the price we ordered the printer ultimately. The installation process is cumbersome (USB cable must be connected to computer), the driver installation takes a long time and without assigning a fixed IP in the WLAN of the printer driver installation despite would not have been found. If you look so unfamiliar, you have lost. The build quality is medium, the front door is made of fairly thin plastic and must be closed with pressure because it does not fit properly and warps. Overall, the sculpture seems everywhere quite thin and cheap. But more importantly, our printer has printed streaky all full-color printing. Total stripes were everywhere visible (like a printer ink where the ink is about to run slowly), worse but were 1-2 permanent dark horizontal stripes, which could be seen depending on the color in another place. Even rotating the toner cartridges in the Manual has brought no improvement. We then returned to the unit and requested a replacement. But here was the same banding noticing. Finally, we have also returned the second printer and an HP LaserJet Pro CM1415fnw ordered, with which we are now really very satisfied.
