Wanted to old Canon FD 50 F1.4 at the Olympus OMD EM-5 ausprobieren.Für trying but not too much to spend my. Except for the slightly longer shipping, I received a simple but well-made MFT Adapter metal. Fit. The panel at the FD lens must be adjusted easily by the rotating ring on the adapter. However, the problem at the OMD is the manual focussing. Since no electronic connection exists, there is no adjustment assistance (Lupe) With a little patience there is reasonably good results. I still have a FD 135 f 2.5 tested. Both lenses provide beautiful sharpness / blur effects at open aperture, but are basically very soft in the imaging performance. One must see these analog lenses a bit as fun for interesting, different, creative image results. To match the price of the good MFT adapter that I can recommend. Because some "tweaking" when connected to the FD bayonet actually is necessary because you only have to push the iris control to the left (but easily doable) I think the proposal for each FD lens to get an adapter actually practical, especially for such a low price, since the adapter now always on Canon bayonet sitting, you can immediately use the MFT mount, but should get appropriate MFT Lens caps equal with, because the Canon FD caps can not be used ..
