I bought the 10 Watt spotlight because it was reasonably priced. Small compact everything seems to be good. Now I wanted to install the radiator. The flexible 3 core cable (0.75 mm²) with its maximum of 30cm of course, was much too short. So the lid was opened from the terminal box and I could not believe my eyes. The protective conductor (green / yellow wire) was simply not pinched and clamped. This is a die-cast aluminum housing and as a soil must drann !!! The built-in electronic transformer (metal housing) pressed 230V wires from the motion. When the fraying knows. So drilled hole and re-connect the ground wire and tried the evening. By the way who is looking for a terminal block or the like, which I must entteuschen that there is not. The cable is soldered and finished with heatshrink. Weak Konstuktive development. Result: Lights quite neat for 10 watts. The motion detector is not particularly good, since professional equipment are significantly better. But it does not cost much and you have to put into the mix. Because still about 220 people a year die in Germany to an electric shock, I can only give 1 star. Better -1 star because a human life is not to be assessed by stars.
This lamp is only for people in electrical engineering.