For unit itself. The unit works very well and reliably. Also, the grinding surface is large enough. However, the corners of walls, ceilings and floors need to be edited by other equipment. The key handle on the grinding head can be adjusted, so that a very good tendency for the individual holding position is possible. The force depends on the operation. One grinding for example the ground, so it is less than if you grind a blanket or edited because the equipment weight to come. The speed is divided into six stages, so that an adaptation to a smooth handling of a surface is possible.
The dust is mostly absorbed, but there remains a certain amount of rest. It is important that the hose between the grinding device and the dust container remains relatively straight, the more tight curves are formed, the worse the dust extraction is due to the resistance. The dust is actually pressed into the dust container and not sucked as in a vacuum cleaner. Through the various cutting attachments to surfaces of walls can be edited to floors and screeds. Materials such as wallpaper, wood, carbon, stone and flooring are not a problem. The important thing is always the right choice of the insertion tool and the associated speed.
The surface to be treated must be dry.
Thus we have z. B. the new floor in the garage sanded so that the two-layer 2K sealer keeps well. It has worked very well.
The exchange of application tools should be suitably light, but should the very good documentation here strictly observed. The included tips for what what is used at what speed are very useful. The engine 1010 Watt is very powerful and very well controlled by the six steps. The power cable is operational, but not of an exceptionally sturdy design. This is a normal black plastic cable. Surely that keeps for a while, but in such devices and then EXPERT Class, includes a power cable out of rubber. Fortunately, the device can be opened, if necessary, and replace the power cord.
Overall a very good, useful and high-quality working tool.
