Among the criticisms of some pros here: which one NEN laser and a working light in the sun not (good) looks probably should be clear.
However, you can see the laser once the intersection is located in the shade; one imagines the machine according to, is also not a problem.
And if it is bright enough, I also do not need a light ....
From because of abrupt start walking: is indeed nowhere she has soft-start, you can not expect in this price range also. Besides, this is not necessary in so nem device, since you eventually have to fear no torque jerk at hand such as in a Einhandwinkelschleifer. And starting current limitation if it were not necessary, since the 1500 Watt certainly overwhelm no mains. And who is so jumpy that upsets in the abrupt start walking who buys certainly NEN rubber mallet to pursue nails ... not the one otherwise startled at every stroke ....
And for readjustment: can happen in any price range with any saw, but as a handyman should be managed it well. Whoever has a problem, in fact no machine of this type needs ..
I also need to re-adjust something in my state of the rip fence is not at a right angle to the saw blade at zero degrees ... was done in about a minute. Simply removing the four screws and the stop Inbuss rotated slightly tightened and trial cuts already had everything in balance.
Addendum: the tension of the collection bag is good nothing wrong. It has a hole to get out of the blowing dust at the base. But even if you close the (eg with tape) but eh lands hardly anything in the bag. But if at all crosscut saws so that has made my old and both professional machines in the carpentry in the time I learned. But does not matter, any device for woodworking makes happens to dust ....
Conclusion: Definitely for the money one of the best saw its kind!