I print a lot of graphics and text, rare photos. The term of the graphics and the text is done wiklich very quickly. Because the printer is hardly slower than a color laser printer. The colors are faultlessly and the typeface is very good. Photos printed in the EPSON very good quality, although there certainly are better photo printer. Among the desired improvements. When printing from PDF - files treat yourself every now and then a longer breather printer. In other reviews I've read that the well is located at the overheating problem of the print head (it prints now times very quickly). However, the same files as a JPG - file print faster. My guess is that the very small size RAM memory (only 128MB) ensures a slow processing of print jobs. In today's printers that memory should already be larger in terms of larger print jobs or at least extended. For competitors this memory is usually 512MB or above. The Wi-Fi - and the FAX - I do not use function, so at this point no judgment. The scan function (document feeder, two-sided feed, etc.) works perfectly un in a very good quality. A little tip on the cartridge. There are also highly recommended alternative cartridges which make printing even more affordable. I've been using for a long time, for example the cartridges Printer-Express and without any problems at the printer. A word about the size of the printer. One should be clear about when purchasing that one acquires a cube of 50 cm edge length well.
Updated on 27/02/2014 (subject: breathers)
I had after prolonged operation of the printer (print several hours with only very short breaks) the problem that the pressure stopped in the middle of the page and the printer gave the impression as if he were asleep. Even after a Abruch the printer stopped at exactly the same spot again stand. Printouts with the "fine" or higher no longer walked.
Fortunately came with me before returning the printer's period of reflection. The result after a few hours of Internet research was too long a USB - connection to the printer and not overheating the printhead. Unlike many other printers, the EPSON coped not a normal USB - connecting more than 3 meters. For longer connections appear to go some of the data lost. With USB - connections up to 3 meters length of EPSON will print in any setting very quickly and without pause. Even with larger print jobs, their execution is only interrupted by refilling the paper tray, everything runs smoothly. Connect to an active USB - cable (longer lengths than 5 meters possible) has not been tested. Conclusion: With the correct connection and the correct (alternative) cartridges, the printer has earned for me 10 out of 5 stars.
