He already makes unpacking a very sophisticated look. The sheets are all processed very clean, no sharp edges or the like. He also has a considerable weight of about 1.5kg and has a footprint of 24 x 10 cm in height, it measures 36cm. In the wall there are likely to be variation in height 2-3 cm longer. However, the heavy weight also causes the bit device of the capsule dispenser in vibration when you push up. But that's not so bad, since one takes the capsules eh bottom and stability is not compromised. A small brace from the bottom plate of the stand would have but avoided. At first I thought the floor is uneven, because the donor has gekippelt. I then noticed that are secured to the bottom small rubber adhesive feet for own assembly with an adhesive strip, so it is even better and the sheet is not on the work surface. Visually, it also makes her a lot, to have are the small wall of colorful shiny capsules.
Filling the capsule dispenser works very easily. The rails are adequately dimensioned so that the capsules do not get caught and slip directly. Besser said they fall down. On the enclosed list is also described, which one should not let the capsules fall from the top, as they can be damaged. When filling is still important to ensure that the lower capsule is always on the overlying: So the bottom of the lower capsule front, because otherwise the capsules can not be removed (but what they probably have in common with all rail services, and also the accompanying List described). The capsules lie but already even in the correct position.
The removal work is as simple as filling. It is the desired capsule between the finger and pulls it forwardly and the next slipping. Who has more than 6 coffees, the rails can also split and remove the capsules upwards.
The individual points I have documented in the gallery still with pictures.
I can issue a strong buy recommendation, since quality, appearance and functionality are excellent.