As such, a successful and good product.
But some preliminary and instructions are still needed:
700 lumens are specified for the lamp brightness to the Amazon product description. On the packaging of the lamp, however, only 500-550 LM (lumens / meter). What is correct?
The currently selected color of the lamp is formed by three groups of LEDs in the primary color red, green and blue. Depending on the brightness of the primary colors appear by visual overlay the corresponding mixed color. Except for white (all the basic colors have almost identical energy) are not all LED groups fully driven in mixed colors. This means that the lamp brightness is up to about 66% lower in color reproduction.
For room illumination is not simply enough the existing lamps replaced. To illuminate a room but now with the same amount of light as white in a particular color is needed up to three times more than previously RGB lamps white lamps.
In the warm white mode, the RGB lamp power t really begins. Here, the largest amount of light is emitted. When using multiple RGB lamps that should be considered. The software enables the grouping and control of individual RGB lamps, so that an individual basic illumination is possible.
As for me, a PC running Windows Media Server as a control and is always in operation I would want a Windows program that at programmed times takes control of lamps. but I'll probably have to program yourself. Thanks to WiFi should not be overly problematic.
The RGB lamp is a good product with lots of potential for experimentation.
